IJCOPE Journal

UGC Logo DOI / ISO Logo

International Journal of Creative and Open Research in Engineering and Management

A Peer-Reviewed, Open-Access International Journal Supporting Multidisciplinary Research, Digital Publishing Standards, DOI Registration, and Academic Indexing.
Journal Information
ISSN: 3108-1754 (Online)
Crossref DOI: Available
ISO Certification: 9001:2015
Publication Fee: 599/- INR
Compliance: UGC Journal Norms
License: CC BY 4.0
Peer Review: Double Blind
Volume 02, Issue 9

Published on: September 2026

12 V-CLASS 3S LI-ION CHARGER, BMS AND IOT-BASED BATTERY MONITORING SYSTEM

Om Khond Utkarsh Tamgire Pawan Potdukhe Gaurav Munge Tejas Kirkan

Kanchan Ghode

Department of Electrical Engineering, Tulsiramji Gaikwad Patil College of Engineering and Technology, Nagpur, India

Article Status

Plagiarism Passed Peer Reviewed Open Access

Available Documents

Abstract

This paper presents the design of a 12 V-class, three-series (3S) lithium-ion battery system that integrates a constant-current/constant-voltage (CC-CV) charger, a protection and cell-balancing battery management system (BMS) built around the Texas Instruments BQ76920 analog front-end (AFE), and an ESP32-based Internet-of-Things (IoT) telemetry layer. The pack is rated 11.1 V nominal (12.6 V full charge) with a capacity of approximately 6 Ah. Unlike single-cell fast-charge integrated circuits, which cannot terminate correctly on a multi-cell stack, the proposed architecture routes all charge current through the BMS charge field-effect transistor (FET) so that per-cell over-voltage cutoff and passive balancing remain active throughout the charge cycle. The ESP32 polls the AFE over an I²C bus, computes state of charge (SOC) using coulomb counting with open-circuit-voltage (OCV) fallback, and publishes pack telemetry to a cloud dashboard over MQTT, with an optional local OLED read-out. Design calculations for charge time, coulomb-counter resolution and balancing current are derived from the component data sheets and cross-checked against the target capacity and C-rate. The resulting architecture concentrates protection, balancing and telemetry read-out in a single AFE, reducing bill-of-materials count relative to discrete comparator-based designs while remaining implementable with hobbyist-accessible modules.

How to Cite this Paper

Khond, O., Tamgire, U., Potdukhe, P., Munge, G. & Kirkan, T. (2026). 12 V-Class 3S Li-Ion Charger, BMS and IoT-Based Battery Monitoring System. International Journal of Creative and Open Research in Engineering and Management, <i>02</i>(9), 1-9. https://doi.org/10.55041/ijcope.v2i9.182

Khond, Om, et al.. "12 V-Class 3S Li-Ion Charger, BMS and IoT-Based Battery Monitoring System." International Journal of Creative and Open Research in Engineering and Management, vol. 02, no. 9, 2026, pp. 1-9. doi:https://doi.org/10.55041/ijcope.v2i9.182.

Khond, Om,Utkarsh Tamgire,Pawan Potdukhe,Gaurav Munge, and Tejas Kirkan. "12 V-Class 3S Li-Ion Charger, BMS and IoT-Based Battery Monitoring System." International Journal of Creative and Open Research in Engineering and Management 02, no. 9 (2026): 1-9. https://doi.org/https://doi.org/10.55041/ijcope.v2i9.182.

Search & Index

References

[1] S. Ma, M. Jiang, P. Tao, C. Song, J. Wu, J. Wang, and W. Shang, “Temperature effect and thermal impact in lithium-ion batteries: A review,” Progress in Natural Science: Materials International, vol. 28, no. 6, pp. 653–666, 2018.

[2] B. F. Aspalli et al., “PV Sourced Battery Management System with IoT Based Real Time Monitoring System for Electric Vehicle,” in Proc. 2022 IEEE 2nd Int. Conf. on Mobile Networks and Wireless Communications (ICMNWC), Tumkur, India, 2022, doi: 10.1109/ICMNWC56175.2022.10031973.

[3] K. Friansa, I. N. Haq, B. M. Santi, D. Kurniadi, E. Leksono, and B. Yuliarto, “Development of Battery Monitoring System in Smart Microgrid Based on Internet of Things (IoT),” Procedia Engineering, vol. 170, pp. 482–487, 2017.

[4] Texas Instruments, bq76920, bq76930, bq76940 3-Series to 15-Series Cell Battery Monitor Family for Li-Ion and Phosphate Applications, Datasheet SLUSBK2, Rev. I, Mar. 2022.

[5] I. Haq, E. Leksono, M. Iqbal, F. Nugroho, Nugraha, D. Kurniadi, and B. Yuliarto, “Development of battery management system for cell monitoring and protection,” in Proc. Int. Conf. Electrical Engineering and Computer Science, 2014, pp. 203–208.

[6] S. Chanthakit and C. Rattanapoka, “MQTT Based Air Quality Monitoring System using Node MCU and Node-RED,” in Proc. 2018 Seventh ICT Int. Student Project Conf. (ICT-ISPC), Nakhonpathom, Thailand, 2018, doi: 10.1109/ICT-ISPC.2018.8523891.

[7] “Battery Monitoring System For Lithium Ion Batteries Using IoT,” in Proc. 2021 Int. Conf., Kuala Lumpur, Malaysia, Nov. 2021, IEEE Xplore doc. 9696496.

[8] E. Paiva-Peredo, “Management and monitoring of lithium-ion battery recharge with ESP32,” Int. J. Power Electronics and Drive Systems, vol. 15, no. 3, pp. 1677–1686, 2024, doi: 10.11591/ijpeds.v15.i3.pp1677-1686.

[9] M. Babiuch, P. Foltýnek, and P. Smutný, “Using the ESP32 microcontroller for data processing,” in Proc. 2019 20th Int. Carpathian Control Conf. (ICCC), 2019, pp. 1–6.

[10] Espressif Systems, ESP32-WROOM-32D / ESP32-WROOM-32U Datasheet, Shanghai, China, 2023.

Ethical Compliance & Review Process

  • •All submissions are screened under plagiarism detection.
  • •Review follows editorial policy.
  • •Authors retain copyright.
  • •Peer Review Type: Double-Blind Peer Review
  • •Published on: Oct 01 2026
CCBYNC

This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. You are free to share and adapt this work for non-commercial purposes with proper attribution.

View License
Scroll to Top