IJCOPE Journal

UGC Logo DOI / ISO Logo

International Journal of Creative and Open Research in Engineering and Management

A Peer-Reviewed, Open-Access International Journal Supporting Multidisciplinary Research, Digital Publishing Standards, DOI Registration, and Academic Indexing.
Journal Information
ISSN: 3108-1754 (Online)
Crossref DOI: Available
ISO Certification: 9001:2015
Publication Fee: 599/- INR
Compliance: UGC Journal Norms
License: CC BY 4.0
Peer Review: Double Blind
Volume 02, Issue 04

Published on: April 2026

DEVELOPMENT, CHARACTERIZATION OF ULTRASONIC- ASSISTED STIR-SQUEEZE CAST AL7075/SIC COMPOSITE

S.TANUJA S.LIKITH S.BARGHAV P.CHINNABABU K.UMAMAHESHWARARAO V. SUBRAMANYAM

DOI:https://doi.org/10.55041/ijcope.v2i4.091

Article Status

Plagiarism Passed Peer Reviewed Open Access

Available Documents

Download PDF Review Report

Abstract

Aluminum metal parts are increasingly being used in the automotive industry in place of ferrous materials in an effort to reduce weight and pollution. At the same time, aluminum and its composites are being used more frequently in the aerospace and marine industries due to their lightweight nature and good corrosive qualities. Aluminum-based metal matrix composites have received a lot of attention in research and development because of their remarkable mechanical qualities and prospective uses in the automotive and aerospace industries. This study offers a comprehensive examination of the manufacturing techniques and mechanical testing associated with advanced aluminum metal matrix composites. By reviewing existing literature, the paper explores the different reinforcement materials, processing methods, and characterization techniques employed to enhance the mechanical performance of these composite materials.

How to Cite this Paper

S.TANUJA, , S.LIKITH, , S.BARGHAV, , P.CHINNABABU, , K.UMAMAHESHWARARAO, & SUBRAMANYAM, V. (2026). Development, Characterization of Ultrasonic- Assisted Stir-Squeeze Cast Al7075/Sic Composite. International Journal of Creative and Open Research in Engineering and Management, <i>02</i>(04). https://doi.org/10.55041/ijcope.v2i4.091

S.TANUJA, , et al.. "Development, Characterization of Ultrasonic- Assisted Stir-Squeeze Cast Al7075/Sic Composite." International Journal of Creative and Open Research in Engineering and Management, vol. 02, no. 04, 2026, pp. . doi:https://doi.org/10.55041/ijcope.v2i4.091.

S.TANUJA, , S.LIKITH, S.BARGHAV, P.CHINNABABU, K.UMAMAHESHWARARAO, and V. SUBRAMANYAM. "Development, Characterization of Ultrasonic- Assisted Stir-Squeeze Cast Al7075/Sic Composite." International Journal of Creative and Open Research in Engineering and Management 02, no. 04 (2026). https://doi.org/https://doi.org/10.55041/ijcope.v2i4.091.

Search & Index

Google Scholar Crossref DOI ResearchGate

References


  1. Varvani‐Farahani, A. (2009, November 5). Composite Materials: Characterization, Fabrication and Application-Research Challenges and Directions. Springer Science+Business Media, 17(2), 63-67. https://doi.org/10.1007/s10443-009-9107-5

  2. Kumar, R., Vichare, O., Debnath, K., & Paswan, M. (2021, January 1). Fabrication methods of metal matrix composites (MMCs). Elsevier BV, 46, 6840-6846. https://doi.org/10.1016/j.matpr.2021.04.432

  3. Rajak, D K., Pagar, D D., Menezes, P L., &Linul, E. (2019, October 12). Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Multidisciplinary Digital Publishing Institute, 11(10), 1667-1667. https://doi.org/10.3390/polym11101667

  4. Lakshmikanthan, A., Angadi, S., Malik, V., Saxena, K K., Prakash, C., Dixit, S., & Mohammed, K A. (2022, September 2). Mechanical and Tribological Properties of Aluminum-Based Metal-Matrix Composites. Multidisciplinary Digital Publishing Institute, 15(17), 6111-6111. https://doi.org/10.3390/ma15176111

  5. Trinh, S N., & Sastry, S. (2016, May 12). PROCESSING AND PROPERTIES OF METAL MATRIX COMPOSITES

  6. Ávila, A., Oliveira, A M D., Leão, S G., & Martins, M G D M. (2018, July 5). Aramid fabric/nano-size dual phase shear thickening fluid composites response to ballistic impact. Elsevier BV, 112, 468-474. https://doi.org/10.1016/j.compositesa.2018.07.006

  7. Ruh, R., Palazotto, A N., & Watt, G W. (1988, April 1). Introduction to Ceramic Matrix Composites in Aerospace Applications. American Society of Civil Engineers, 1(2), 65-73. https://doi.org/10.1061/(asce)0893-1321(1988)1:2(65)

  8. Khalid, M Y., Umer, R., & Khan, K A. (2023, January 1). Review of recent trends and developments in aluminium 7075 alloys and metal matrix composites (MMCs) for aircraft applications

  9. Narayana Murty SVS, Nageswara Rao B, Kashyap BP. On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix composites. Compos Sci Technol Jan. 2003;63(1):119–35. https://doi. org/10.1016/S0266-3538(02)00197-5

  10. Previtali B, Pocci D, Taccardo C. Application of traditional investment casting process to aluminium matrix composites. Compos A: Appl Sci Manuf Oct. 2008;39 (10):1606–17. https://doi.org/10.1016/J.COMPOSITESA.2008.07.001.

Ethical Compliance & Review Process

  • •All submissions are screened under plagiarism detection.
  • •Review follows editorial policy.
  • •Authors retain copyright.
  • •Peer Review Type: Double-Blind Peer Review
  • •Published on: Apr 06 2026
CCBYNC

This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. You are free to share and adapt this work for non-commercial purposes with proper attribution.

View License
Back to Volume 02, Issue 04View All Issues Next Article

← Previous Article

Development of Bidirectional on – Board Charge for Evs Using Gan – Based Power Convertors

Next Article →

Diabetic Prediction System Using ML
Scroll to Top